os presento otra playmatic ochentera
la rock 2500 con una electronica mas mejorada con respecto a sus antecesoras pero basicamente con los mismos problemas
un juego rapido y entretenido con la peculiaridad de que los flippers esta a diferente altura es decir no estan simetricos como es normal en los pinballs
esta bien pero no me da ninguna sensacion al jugar con los flippers asi
paso a enseñaros la maquina
------------------------------------------------
Good friends
I present another playmatic eighties
the rock 2500 with a more electronic improved over its predecessors but basically the same problems
fast and entertaining game with the peculiarity that the flipper is at different heights ie are not symmetric as is normal in the pinballs
okay but gives me no feeling when playing with the flippers so
way to teach the machine
General
By str_pinball at 2012-07-20
Cabezal
By str_pinball at 2012-07-20
Tablero
By str_pinball at 2012-07-20
Detalles del tablero
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
Tarjeta de instrucciones
By str_pinball at 2012-07-20
Artes
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
La Electronica
By str_pinball at 2012-07-20
Sonido
By str_pinball at 2012-07-20
Cpu
By str_pinball at 2012-07-20
Bobinas y flippers
By str_pinball at 2012-07-20
Puerta del cabezal
By str_pinball at 2012-07-20
Y por delante
By str_pinball at 2012-07-20
Tablero por debajo
By str_pinball at 2012-07-20
Bueno pues hasta aqui teneis la maquina vamos ahora con las averias de este modelo en concreto
Estaba un poco de desguace faltaban bobinas , portas, switches, cables sueltos por ahi en fin un poco de todo
os pongo algunos ejemplos
-------------------------------------------------------------------------------------
Well here you have the machine to go now with the breakdowns of this particular model
I was a bit of scrapping missing reels, slides, switches, cables loose out there in the end a bit of everything
I put some examples
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
placa de alimentacion con algun ñapeo
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
En fin como podeis ver bastante faena de reconstrucción
aproveche a sacar todas las placas para poder ir mirandolas a fondo y pegarles un lavado ya que la cpu tenia ya el sulfato actuando como es normal en las placas de playmatic
-----------------------------------------------------------------------------------
Well as you can see quite task of reconstruction
take advantage of all plates to be looking at them and beat them thoroughly washing because the cpu had already acting as normal sulfate on the plates of playmatic
By str_pinball at 2012-07-20
tambien aproveche para probar un conjunto de placas que un amigo me envio sabiendo que tenia en casa una rock2500
para ver si se las podia reparar
-------------------------------------------------------------------------------------
also take the opportunity to test a set of plates that a friend had sent me home knowing that a rock2500
to see if they could repair
By str_pinball at 2012-07-20
como podeis ver el sulfato hizo de las suyas
cambie todas las resistencias y condensadores de la zona para sanear
-------------------------------------------------------------------------------------
as you can see the sulfate did his
change all the resistors and capacitors to clean up area
Connectors also rotten sound
Conectores del sonido podridos tambien
By str_pinball at 2012-07-20
como no tenia este tipo de conectores pues me lie a ver que inventaba
y esto es lo que me salio bastante efectivo
---------------------------------------------------------------------------
as such had no connectors for I lie to see who invented
and this is what I came quite effective
By str_pinball at 2012-07-20
eliminados los antiguos
corte unos molex con cable y todo
eliminated the old
some molex cable cut and all
By str_pinball at 2012-07-20
y solde
By str_pinball at 2012-07-20
el resultado excelente y a sonar de nuevo la maquina
puse las bobinas que faltaban, adecente las resistencias de la tension de mantenimiento de los flippers y puse los portas y switches que faltaban
resultado maquina lista y funcionando
----------------------------------------------------------------------
excellent results and the machine ring again
began missing coils, resistors adecente tension keeping the flippers and put the slides and switches missing
resulting machine up and running
final photos
fotos finales
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
By str_pinball at 2012-07-20
un saludo a todos
